弹簧上料设备 Smart FEG

  • 螺旋弹簧解缠绕和上料
  • 小型控制器实现简便操作
  • 降低装配成本

The handling of the spring often causes a great challenge for workshops involved in assembly and installation work. Springs are supplied most of the time in bulk and are difficult to feed. Tasks like that can easily be carried out using the Afag FEG spring disentangling and feeding unit.

 

The springs agitate in a glass bowl by means of an air stream. The bowl holds up to 0.5 litre of springs and can be fitted with 1 to 6 outlets and are being fed through nozzles in nylon tubes. Depending on the shape of the springs a feed rate up to 60 pcs per minutes and outlet be obtained. The unit consists of the feeding bowl with the outlets, the control cabinet and a column support with a foot plate.

 

The feeding rate depends on the type and size of the spring. The feeding rate can only be calculated by tests with a volume of one litre of springs.

 

Spring diameter: d = 1.5 - 6 mm

Spring length: L = 1.5 - 6 x d

弹簧上料设备 Smart FEG

Our proven spring feeder device (FEG) got an upgrade: The Smart FEG now comes with an integrated compact control system that, just like our drum conveyor, can access all functions and settings via an intuitive menu on the integrated touchpad. Optionally, ring sensors for detecting the filling levels of the tubes can be managed straight from the small control system.