Handling Systems Electric Linear axes, rotational axes, rotary modules and grippers with either electric or pneumatic drives form the basis of our standardised pick & place handling systems. Our handling systems are characterised by their robustness, longevity and continuously high quality.
Find the right handling system
EPS mini YZ Compact handling only 40 mm wide Energy and cost-efficient handling Flexible alternative for pneumatic handling EPS midi YZ Compact handling with boom Y to 500 mm stroke Stiff gantry module ES30 with 255 N peak force Light-weight vertical module ES20 for high dynamics EPS maxi YZ Powerful, robust boom system Dynamic even at higher loads Vertical module with joining forces up to 255 N EPS giga YZ Rigid slide contour facilitates precise press-in tasks Rapid movement of payloads weighing up to 15 kg with a precision of +/-0.02 mm System width including energy chain, travel measuring system and mass compensation of just 180 mm EPS tera YZ Peak force of up to 1024 N For shortest cycle times with payloads of up to 20 kg Lowest standard system in its class, including energy chain EPS mini XZ Compact handling for longer strokes Strong alternative to simple toothed belt axes Long service life from low-wear setup EPS midi XZ Torsion-stiff X-axis with double guide Very high dynamics from motors with 255 N, 550 N and 1000 N peak force Light-weight vertical module up to 300 mm stroke EPS maxi XZ Torsion-stiff X-axis with double guide and high dynamics Stiff setup even at long booms Powerful Z-axis, also for joining tasks EPS mini XYZ Simple alternative for small robots Can be controlled directly by the PLC Scalable size in X, Y, Z, C EPS midi XYZ Very dynamic alignment of the axis combination High Y/Z stiffness from double guide in the X-axis Booms up to 500 mm due to light-weight Z-axis EPS maxi XYZ Powerful, robust setup Suitable for joining tasks due to stiff modules Large selection of lifting combinations EPS mini gantry XXYZ Lightweight axes for short cycle times For precise palletizing tasks with low part weight Z-stroke up to 200 mm EPS midi gantry XXYZ High positioning accuracy due to double guides in X- and Y-direction X- and Y-stroke up to 1660 mm EPS maxi gantry XXYZ Stiffest structure for maximum accuracy Suitable for high masses Z-axis up to 500 mm stroke EPS mini gantry s Lateral boom up to 640 mm stroke Ideal for palletizing tasks with low mass Low space requirement EPS midi gantry s Lateral boom up to 630 mm stroke Stiff Y-axis due to double guide Portal axes with high force EPS maxi gantry s Stiff structure with low space requirement Ideal for palletizing tasks with high mass Z-axis up to 300 mm stroke EPS mini gantry h For assembly above the working area Dynamic X-axis Y-stroke up to 640 mm EPS midi gantry h Lateral boom up to 1130 mm stroke Stiffest connection between X- and Y-axis Double guide in X- and Y-axis EPS maxi gantry h Stiffest structure for a handling above the working area Suitable for high masses Z-axis up to 200 mm stroke
Close
© 2024 Afag Automation AG
